Emec Catfi

Emec CatFi

Water meter with pulse generator with dry dial

A water meter with pulse generator is placed in the water pipe. The water meter gives an x number of pulses per litre. These pulses can be used by a suitable metering pump to dose very precisely into the water supply. In this way, it is possible to obtain an 1%-like solution, for example. Control by ppm is also possible this way. The dosing pump adjusts itself when the flow increases or decreases. So you always have the right dosage. In addition, this water meter comes with a dry dial. This is useful when there is some contamination in the water, for clean drinking water a wet dial can be used if required.

Emec CATFIT | Water meter for Corrosive Substances

For water flows with corrosive substances, a Teflon-lined water meter with pulse generator is available, the CATFIT. Please note! If you want the water meter to communicate with the dosing pump, you need a dosing pump with MF (Multifunction) configuration.

Features

• Water temperature max 30 degrees Celsius.
• Maximum water pressure 16 BAR.
• Equipped with 2.5m cable.
• Various grommet sizes available, see ?Versions' tab.

Versions The table below shows which versions are available. Not quite sure which water meter you need? Then please contact us.

Model	CATFI 15	CATFI 20	CATFI 25	CATFI 30	CATFI 40	CATFI 50
Fittings	Fittings 1/2_	Fittings 3/4_	Fittings 1_	Fittings 1.1/4_	Fittings 1.1/2_	Fittings 2_